Maston

RUBBERcomp products

Our handy range of colour shades means you can find spray and tinned paint for coating surfaces, suitable  for indoor and outdoor use.

News

  • Spray RUBBERcomp Rust effect matt 400ml

    Spray RUBBERcomp Rust effect matt 400ml

    RUBBERcomp® is a sprayable multi-purpose, air drying specialty rubber coating. It protects items against moisture, acids, abrasion, corrosion, and skidding/slipping, and provides a comfortable, controlled grip. It remains flexible and will not crack or become brittle in extreme weather conditions. It has been tested and proven in temperatures from -30°C to +90°C. Easy to peel off. Around four paint layers needed for adequate film thickness. Instructions: Clean the surface of oils, grease, dirt, wax and loose rust. Shake the spray can well before use. Spray a small test patch on an invisible area. Previously painted surfaces with 1-component paintsmight react with RUBBERcomp®. Spray several thin layers. 4 paint layers are needed for adequate film thickness. Let the surface dry about 10-20 min. between each layer. Thicker layers will take longer to dry. Clean the nozzle by spraying the can upside down for approx. 3-4 seconds. Wipe off any excess paint from nozzle if necessary. [VIDEO RUBBERcomp](https://www.youtube.com/watch?v=-_20bFIeu6Q)

    Read more
  • Spray RUBBER Shield Transparent matt 400ml

    Spray RUBBER Shield Transparent matt 400ml

    RUBBERshield® is a revolutionary scratch and petrol resistant coating. It is designed to finish surfaces which are coated first with RUBBERcomp® rubber coating. RUBBERshield® laminates and bonds efficiently with the previous rubber layer. RUBBERshield® remains flexible and stretchy over time, and will not crack or become brittle in extreme weather conditions. The hardness, scratch resistance and the solvent resistance of RUBBERshield® coating can be compared to original automotive 2-component clear coats. Tested and proven in temperatures from -30°C to +90°C. INSTRUCTIONS FOR USE: Coat first the surface with RUBBERcomp® synthetic rubber and follow the instructions of use. Spray several, at least one and a half cross layers (=3 layers) to get enough film thickness. Let the RUBBERcomp® surface dry until completely dry. Applying RUBBERshield® Spray one covering layer horizontally first. Let dry and level for a couple of minutes. Thereafter spray another vertical layer. Finally spray a third wet layer horizontally. DRYING Drying time (at 20°C, 50% relative air humidity): Dust-dry: after 30 minutes Dry to touch: after 60 minutes Petrol and scratch resistance: 2 days Completely hard 7 days Applying in cooler temperatures or under different air humidity conditions may affect drying times, finish quality, and spray performance.

    Read more